Installation and applicability of PANEL APA R20/22 panels for heating and cooling

PANEL APA R20/22 radiant water panels produced by Panelradiant SRL are a modern solution for ceiling and wall heating and cooling, used both in Romania and abroad. These panels are made of plasterboard and, being prefabricated and pre-assembled, they have a quick installation and a wide applicability. Here are some details about these panels:

APPLICABILITY

The PANEL APA R20/22 radiant water panel system for heating and cooling can be used both on the ceiling and on the wall. They are designed to be installed in new buildings or those undergoing renovation. Thus, you can benefit from maximum thermal comfort throughout the year in any kind of building, be it residential homes, apartments, houses or even commercial and industrial premises.

COMPOSITION

The panels are made of 15 mm fireproof plasterboard. Inside the plasterboard are oxygen barrier (anti-aging) pipe coils through which hot or cold water circulates. The panel also contains an ESP200 polystyrene board to increase thermal efficiency. The milled cover of the panel is made of a pre-milled fireproof plasterboard of 2600x250x15 mm, which closes the spaces intended for the connections between the radiant panels.

INSTALLATION

The resistance structure must be sized to support the weight of the panels, water and pipes for connections. The primary one consists of UD, CD profiles and support brackets/rods. The secondary structure is made only from CD profiles. Radiant panel connections are made using PUSH-FIT quick connections between the multi-layer pipe and the oxygen barrier pipe.

These panels are an energy-efficient solution for ceiling and wall heating and cooling, and can ensure a comfortable climate in any type of building. If you want to know more details about the assembly and installation of these panels, you can access the RADIANT PANEL page.

Here are some photos of works done in Romania and abroad!

Residential - ceiling and wall heating and cooling with PANEL APA R20/22

HOUSES, APARTMENTS, DWELLINGS

Installations in Romania, Italy, France

HoReCa - heating and cooling through ceiling and wall with PANEL APA R20/22

HOTELS, RESTAURANTS, CAFES

Administrativ

CLĂDIRI BIROURI, SPITALE, ȘCOLI, INSTITUȚII PUBLICE

Frequently Asked Questions about PANEL APA R20/22 radiant panels

What is a ceiling or wall radiant heating and cooling installation?

It is a system installed near the ceiling or wall, which heats and cools with the help of radiation, from top to bottom. It is called a radiant ceiling or wall because it is part of the category of radiant installations.

What are the benefits of radiant heating and cooling panels?

Radiant water panels offer multiple benefits including:

Energy efficiency due to fast heat exchange and operation at low temperatures
Increased comfort by creating a homogeneous temperature without drafts
Flexibility in assembly, fitting any type of structure
Increased interior design possibilities, without radiators or air conditioners
Healthy indoor environment, free of mold and moisture
High efficiency in both heating and cooling

Are pre-assembled water radiant panels energy efficient?

Yes. According to the tests carried out in the accredited WSPLAB Germany Laboratory, the Panel Apa R20/22 radiant panels have achieved results that demonstrate high energy efficiency and very fast heating or cooling using low water temperatures. Pre-assembled water radiant panels therefore offer a significant reduction in energy consumption, helping to save money on bills and reducing your environmental footprint.

Does Panel Apa R20/22 comply with harmonized European norms and standards?

Yes, Panel Apa R20/22 has CE marking according to harmonized European norms and standards.

What is the Panel Apa R20/22 radiant panel made of?

The radiant water panel consists of the following components:

A fireproof plasterboard 2600x1200x15 mm, which can be cut into 5 equal parts of 520x1200x15 mm
On the lower part of the plasterboard, a radiant coil (pipe with oxygen barrier 8×1 diameter) is inserted through which the heating agent (water) will circulate
Instead, a 200ESP high-density polystyrene board is applied (glued) to the top of the plasterboard
Adhesive for gluing the two components, respectively plasterboard and polystyrene.

What kind of buildings are best suited for pre-assembled radiant heating and cooling panels?

Pre-assembled radiant panels for ceiling and wall heating and cooling are an efficient way to heat and cool various types of buildings, from residential to non-residential, both new build and those undergoing renovation.

How can the radiant ceiling heat a room if the heat rises?

Warm air rises due to the phenomenon of convection. Think of a radiator that passes warm air from the bottom up. The radiant ceiling transmits heat from top to bottom by radiation and a small part by convection. Think about how the Sun heats the Earth and all the objects around us. These, in turn, heat the surrounding air. Heat exchange by radiation takes place from an object with a higher temperature to an object with a lower temperature. To understand this phenomenon we have to think about the feeling of comfort on a sunny winter day. The radiant ceiling exchanges temperature with the floor, walls, surrounding objects and people in the room.

How much do PANEL APA R20/22 radiant water panels cost?

Our competitive prices vary based on the typology of real estate and their competitive quality is constant. Estimates are free!

Learn all about the assembly and installation of Radiant Water Panels PANEL APA R20/22 for heating and cooling

Contact us using one of the methods below, and one of our specialists will get in touch with you!

Get an INSTANT quote and a FREE estimate!

Panelradiant SRL

CONTACT

Links